Table of Contents
Advertisement
Operation
15.6 Homescreen
No function.
15.7 Boiler
Setting determining which boiler the InfoWIN Touch con-
trols, e.g. wood chips, wood or pellet boiler, etc.
Factory setting:
Webserver:
Selection:
Automatic boiler:
Wood:
Dual Fuel:
Webserver:
MB 1:
MB 2:
Note.
If there is no boiler (Automatic boiler, wood boiler or dual fuel) available the button is highlighted in gray
and not selectable → see section 15.12 Read plant on side 30.
15.8 Function titles
With function titles, the designations (e.g. BioWIN 2 Touch)
of the boiler or the function module (e.g. INF F05 W) can
be changed.
Note.
After changing a function title, the system must
be read again – see section 15.12 Read plant on
side 30.
Automatic boiler
Webserver
Fig. 35
must be selected when the boiler is turned on for the first time.
AeroWIN / BioWIN 2 / BioWIN 2 Hybrid / PuroWIN
LogWIN
DuoWIN
No boiler, for remote switching (Webserver)
Master control 1 (without boiler)
Master control 2 (without boiler)
Boiler
ZSP-SOFU
Fig. 36
28
Select Boiler
Wood
MB 1
Function titles
After making changes the controller will restart
Dual Fuel
MB 2
BioWIN 2
INF F05 W
Advertisement
Table of Contents
