5 OPERATION
5.8
Setting panel
1.
Overheating indicator
2.
Display
3.
VRD function (reduced open-circuit
voltage) indicator
4.
Trigger mode indicator
5.
Options button
Process selection button (7):
•
TIG HF (10)
•
TIG Live (9)
•
MMA (8)
•
Navigation
•
Parameter selection
Press the Process selection button (7) for 3 sec to go to the advanced feature menu and
press Process selection button (7) to select the values. Use the Welding current control knob
(6) to change the values.
In TIG HF or TIG Live mode:
•
Gas pre flow time (PREG 0 - 5 s)
•
Start current (IGNA 10 - 100%)
•
Up slope time (SLPU 0 - 10 s)
•
Down slope time (SLPD 0 - 10 s)
•
End current (FINA 10 - 100%)
•
Gas post flow time (POSG 0.5 - 15 s)
•
Background current (BKGA 10 - 100%)
In MMA mode:
0463 752 001
6.
Welding current control knob and
advanced feature control knob
7.
Process selection button
8.
MMA indicator
9.
TIG Live indicator
10.
TIG HF indicator
- 17 -
© ESAB AB 2021