Setting Panel - ESAB ET 200iP PRO Instruction Manual
Hide thumbs
Also See for ET 200iP PRO:
- Service manual (64 pages) ,
- Instruction manual (26 pages) ,
- Service manual (64 pages)
Table of Contents
Advertisement
5 OPERATION
5.8
Setting panel
1.
Overheating indicator
2.
Display
3.
VRD function (reduced open-circuit
voltage) indicator
4.
Trigger mode indicator
5.
Pulse mode indicator
6.
Frequency indicator
Process selection button (9):
•
TIG HF (12)
•
TIG Live (11)
•
MMA (10)
•
Navigation
•
Parameter selection
Press the Process selection button (9) for 3 sec to go to the advanced feature menu and
press Process selection button (9) to select the values. Use the Welding current control
knob (8) to change the values.
In TIG HF or TIG Live mode:
•
Gas pre flow time (PREG 0 - 5 s)
•
Start current (IGNA 10 - 100%)
•
Up slope time (SLPU 0 - 10 s)
•
Down slope time (SLPD 0 - 10 s)
•
End current (FINA 10 - 100%)
•
Gas post flow time (POSG 0.5 - 15 s)
•
Background current (BKGA 10 - 100%)
In MMA mode:
0463 712 101
7.
Options button
8.
Welding current control knob and
advanced feature control knob
9.
Process selection button
10.
MMA indicator
11.
TIG Live indicator
12.
TIG HF indicator
- 17 -
© ESAB AB 2021
Advertisement
Table of Contents
