Advertisement
Working temperature:
0°C to 40°C (32°F to 104°F)
Humidity at work:
0 to 70 RH
Storage temperature:
-10°C to 50°C (14°F to 122°F)
Storage humidity:
0 to 80% RH
Power source:
1 x 9V block battery, 6F22
Lifetime with an alkaline battery (as a rule) 200h
Dimensions:
148mm x 70mm x 40mm
Photo sensor lead length:
1500mm (approx.)
Dimensions photo sensor:
100mm x 60mm x 28mm
weight:
approx. 250g (5.8 oz)
Accessories: carrying
case, operating instructions, battery
4 Function keys and part designation
1st LCD display: 3 ½ digits with maximum reading value until 1999.
2. on/off key: this key is used to switch the luxmeter on or off
3rd Data-PEAK key: Press this key to cancel the peak recording mode.
4th selection key: Press this key to change the selection of 200Lux/20FC;
2,000Lux/200FC; 20,000Lux/2,000FC; 200,000Lux/ 20,000FC (always repeating in a
circle).
5. data- hold key: this key is pressed to fix the current measured value. All further
measurements are stopped by the luxmeter. If the HOLD key is pressed again, this is
cancelled and the unit can take measurements again.
6. lux/FC unit key: Press this key to select between the Lux or Foodcandle (FC) unit.
7. photo sensor
4
SO-BA-e-2020
Advertisement
