Hints And Tips - Sandstrom SBTB14 Instruction Manual

Hints and Tips

If a problem occurs, it may often be due to something very minor. The following table
contains various tips:
Problem
No power
The remote control does
not function
The unit does not respond
when pressing any buttons
USB
USB port not charging
Bluetooth
I cannot find "SBTB14" on
my Bluetooth device
16
• Ensure the mains cable is connected securely at both
ends.
• Make sure that the ON mode is selected.
• Make sure the POWER ON/OFF Switch is ON.
• Use the remote control near the unit.
• Point the remote control at the remote sensor on the
unit.
• Replace the battery in the remote control with a new
one.
• Remove any obstacles between the remote control and
the unit.
• The unit may freeze up during use. Switch the unit off
and then on again at the mains socket to reset the unit.
• Make sure the allowable charging current of the
mobile device is compatible with the unit's charging
current 1000mA (1A). Otherwise, use the mobile
device's own charging adapter for charging.
• Ensure the Bluetooth function is activated on your
Bluetooth device.
Solution