Auto-Sleep Function; Hints And Tips; Specifications - Sandstrom SANDAIR20 Quick Start Manual

Auto-Sleep Function

This unit now includes an "Auto-Sleep" function.
GB
If the unit is idle, or input volume is too low, to save power, the unit will
automatically enter sleep mode after about 10 minutes.
To wake up the unit, use the following method:
• Turn the unit "Off" then "On" again.

Hints and Tips

If you experience problems during the setting up of your system please first
check the following conditions:
1. Make sure all the connections between the speakers and device are
correct.
2. Make sure that the mains power supply is switched on.
3. If connected to a non-standard games console or audio device, please
consult the manual of those devices for connection.
4. Check that your device's volume level is sufficient.

Specifications

Model
Supply voltage:
Output Power (Total)
Dimension (W x H x D)
Standby power consumption
Features and specifications are subject to change without prior notice.
12
SANDAIR20
100 - 240V 50/60Hz
2 x 9W
Satellite: 94.5 x 229 x 129 mm
<0.5W