Pc Speakers Fitted With Eco-Friendly Power-Saving Technology; Hints And Tips - Sandstrom SANDAIR Quick Start Manual

2.1 channel speaker
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 5
PC Speakers Fitted with Eco-Friendly
Power-Saving Technology
These PC speakers are fitted with the latest eco-friendly power-saving
technology.
After approximately 10 minutes of not receiving an input signal, the unit
will go into auto sleep mode to save power (the power indicator light will
go out and the unit will stop working). The unit will automatically wake up
as soon as it receives an input signal. You can also wake it up by turning the
unit off and then back on again via the on/off switch.
To ensure the best performance from your Sandstrom speakers, always
ensure the volume level on your media source device (PC, CD, MP3) is set
to an adequate level (50% or more). This will also ensure the Eco power
save mode does not operate during normal music play back.

Hints and Tips

If you experience problems during the setting up of your system please
first check the following conditions:
1. Make sure all the connections between the speakers and device are
correct.
2. Make sure that the mains power supply is switched on.
3. If connected to a non-standard games console or audio device, please
consult the manual of those devices for connection.
4. Check that your device's volume level is sufficient.
GB
9

Advertisement

Table of Contents
loading

Table of Contents