Table of Contents
Advertisement
TRUE
tdc
SETUP
STANDARD ACCESSORIES
SHELVING INSTALLATION / OPERATION
The metal frame on the interior sides of the unit can be adjusted to
accommodate different sized containers. Slotted thumb screws can
be unfastened from the interior walls to adjust the metal frame. (See
image 1).
TRUE provides container holders in each dipping cabinet. The
container holders attached to the top of the ice cream containers.
See image 2 to view the container holder.
1
2
STORAGE / LOADING PRODUCT
STORAGE:
Some ice cream flavors have a higher sugar content than most. These
flavors would contain ripple, maple syrup, and candy etc. The high
sugar content flavors need a lower temperature for storage than
others. These flavors would be best stored in the corners of the unit
using the most freezing effect from the walls of the unit.
TRUE's Dipping Cabinet is built for limited display time before
deterioration begins to occur. Ice cream will need long term storage
temperatures.
Ice cream should be immediately place into the Dipping cabinet
after being removed from a delivery truck, walk-in freezer, or storage
cabinet.
Dipping Cabinet will only maintain ice cream at the preset dipping
temperature and is not designed as a hardening cabinet or long term
storage.
Crystallization may occur if ice cream is allowed to warm up prior to
placement in dipping cabinet resulting in loss in product quality.
LOADING PRODUCT:
NOTE: When loading product do not exceed product load line
labeled on the interior wall. (See image 3 below)
3
.
.
www
truemfg
com
8
Advertisement
Table of Contents
