Table of Contents
Advertisement
TRUE
UNDERBAR REFRIGERATION
SETUP
STANDARD ACCESSORIES
SHELVING AND BIN DIVIDER INSTALLATION /
OPERATION
SHELF INSTALLATION:
A. Hook shelf clips onto shelf standards.
B.
Position all four shelf clips equal in distance from the floor for
flat shelves.
C. Shelves are oriented so that cross support bars are facing
down.
D. Place shelves on shelf clips making sure all corners are seated
properly.
Shelf
Shelf
Clip
WARNING!
Do not use pliers or any crimp-
ing tools when installing shelf clips.
Altering shelf clips in any way can lead
to shelving instability.
Shelf
Standards
Shelf
Pillaster
(I-beam)
SHELF INSTALLATION:
For Proper Shelf Clip Installation Please Read The Following
Instructions.
STEP 1
Install the top tab of the shelf clip into the proper hole. Push up on
the bottom of the clip. (See image 1).
STEP 2
Bottom tab of the shelf clip will fit tightly. You may need to squeeze
or twist the bottom of the shelf clip to install. (See images 2 & 3).
STEP 3
After installation, the shelf clip will fit snug into the shelf standard.
The shelf clip should not be loose or able to wiggle out of the shelf
standard.
SHELF INSTALLATION TIPS
1.
Install all the shelf clips before installing the shelves.
2.
Start at the bottom in terms of shelf installation and work your
way up.
3.
Always lay the back of each shelf down on the rear clips before
the front.
1
Installing top tab of shelf clip
3
You may need to squeeze or twist
the bottom of the shelf clip to
install
.
.
WWW
TRUEMFG
2
Installing bottom of the shelf
clip
4
Shelf clip installation complete
COM
6
Advertisement
Table of Contents
