Switching On The Flexacam - Leica Flexacam i5 User Manual

Switching on the Flexacam

Stand-alone mode
ON / OFF button on the Flexacam i5 Compound:
1 1
ON / OFF button on the Flexacam i5 Stereo:
1 1
Flexacam User Manual
ON / OFF button on the Flexacam c5:
1 1
Ensure the following points:
The camera can receive light
O
from the microscope
The camera is
O
to a HD / 4K monitor and
the power supply or to the
compound microscope
Flexacam i5 Compound only)
Set the ON / OFF button (1) to "ON" to
X
switch on the Flexacam.
Startup Procedure
The camera
HD / 4K monitor and run Enersight OSD.
PC mode
1. Set the ON / OFF button (1) to "ON" to
switch on the Flexacam.
The camera is ready to use.
2. Start the Enersight Desktop software.
For additional information on Ener-
sight Desktop, refer to the website
Microscope Software Platform
connected
Enersight.
Network mode
(for
1. Set the ON / OFF button (1) to "ON" to
switch on the Flexacam.
2. Refer page 39 to page 41 for more
guidance.
automatically detects the
33