Leica Flexacam i5 User Manual page 9

Safety Instructions (Continued)
Camera safety and EMC
Our camera has been designed, produced and
tested in compliance with
EN 61010-1: Safety requirements for elec-
O
trical equipment for measurement, control,
and laboratory use - Part 1: General require-
ments (for microscope)
EN 62368-1: Audio / video, information and
O
communication technology equipment -
Part 1: Safety requirements (for optional
external power supply only)
Radio interference suppression in compli-
O
ance with EN 55011 Class A
EN 61326-1, Electrical equipment
O
measurement, control and laboratory use –
EMC requirements
Flexacam User Manual
The camera meets the requirements of EU
directives
2014/35/EU Low voltage directive
O
2014/30/EU EMC directive
O
2011/65/EU RoHS directive
O
2009/125/EC + VO
O
Ecodesign requirements for energy-rela-
ted products only applicable for external
power supply
and carries the CE mark.
Intended for indoor use only in all EU member
states, EFTA states and Switzerland.
EMC precautions
for
Prior to the installation of Flexacam, the elec-
tromagnetic environment needs to be evalu-
ated. It is the responsibility of the operator to
ensure compliance with the environment.
General Notes
If the instrument is being installed in any other
environment than an INDUSTRIAL, it cannot be
guaranteed that the equipment does not inter-
fere with other electronic devices.
INDUSTRIAL environments are part of a sepa-
rate power network, in most cases supplied by
EU 2019/1782
a high- or medium-voltage transformer, dedi-
cated for the supply of installations feeding
manufacturing or similar plants.
Strong electromagnetic fields in the immediate
vicinity of the device can lead to a malfunction
of the screen display.
NOTICE
If Flexacam is installed in any other envi-
ronment than an INDUSTRIAL, it cannot be
guaranteed that the radiated electromag-
netic emissionsdo not interfere with other
electronic devices.
9