Leica Flexacam i5 User Manual page 42

Operation in Network Mode (Continued)
Accessing the device from your Enersight
Mobile App
1. Open your Enersight Mobile App.
2. Click on "Setting" icon, in the tab "Device".
3. Enter the IP address of the Flexacam and
click "connect".
The Flexacam is connected to your mobile
device.
To switch from one mode to another,
the Wi-Fi button on the Enersight
OSD must be disabled.
Flexacam User Manual
Subsequent connections
1. Turn on the Flexacam.
2. Either connect your smartphone or tablet
to the Flexacam Access Point (page 41)
or to the network the Flexacam is already
connected to (depending on the mode you
used before).
3. Open the Enersight Mobile App on your
mobile device and go to "Settings".
4. Click on the latest IP address in the history
list.
The Flexacam is connected.
Operation (Network mode) 42