Stand-Alone Mode: General Notes - Leica Flexacam i5 User Manual

Stand-Alone Mode: General Notes

NOTICE
The Flexacam is designed for the use of 4K
and HD-capable (high definition) monitors.
We recommend connecting the HD / 4K
monitor using an HDMI connector and not
using any adapters (e.g. DVI), as otherwise
proper function can no longer be guaran-
teed!
NOTICE
Please use only the provided 5 V power
supply unit.
Using another adapter with incorrect voltage
can substantially damage the camera.
The Flexacam can be powered by the computer
via the USB-C / USB-A cable (PC mode).
Flexacam User Manual
Installing the USB thumb drive
NOTICE
Make sure to read the following instructions
about formatting and handling the USB
thumb drive provided in order to prevent
malfunctions during image acquisition.
File system and formatting:
exFAT or FAT32 file system is required for the
thumb drive to work correctly, as it is detected
by the Flexacam. Most USB thumb drives are
factory-formatted with FAT32 so that they can
be used immediately.
If the USB thumb drive is formatted differently,
the Flexacam provides the ability to reformat as
exFAT.
1. Press "USB Eject" button but do not remove
the stick.
2. Go to the settings page to format.
During this process all data on the stick are
erased.
Installation
NOTICE
Make sure that the USB thumb drive is
oriented correctly before inserting it into
the Flexacam. If you accidentally insert the
USB thumb drive the wrong way around, this
could damage the camera.
Use a fast USB thumb drive to
X
ensure a quick operation.
27