D-Link DIR-806A User Manual page 133

DIR-806A AC750 Wi-Fi Router
User Manual
After specifying the needed parameters, click the APPLY button.
In order to disable the SNMP agent, in the Configuration section, move the Enable SNMP
switch to the left and click the APPLY button.
If the SNMP manager operates over SNMPv2c, create a read-only community which will be used
by the SNMP manager to get data on the device. To do this, in the Communities section, click the
ADD button and specify the community name in the line displayed. Then click the APPLY button.
To remove a community, click the Delete icon ( ) in the relevant line. Then click the APPLY
button.
If the SNMP manager operates over SNMPv3, create a read-only user which will be used by the
SNMP manager to get data on the device. To do this, in the Users section, click the ADD
button ( ).
In the opened window, specify the needed parameters:
Parameter
Name
Authentication protocol
Authentication
password
Figure 105. The window for adding a user.
Specify a username for access from the SNMP manager.
Select a required authentication method from the drop-down list or
leave the None value if authentication is not required.
Specify a password for user authentication from the SNMP manager.
The field is displayed if the MD5 or SHA value is selected from the
Authentication protocol drop-down list.
Page 133 of 197
Configuring via Web-based Interface
Description