Using Wps Function Without Web-Based Interface - D-Link DIR-806A User Manual

DIR-806A AC750 Wi-Fi Router
User Manual

Using WPS Function without Web-based Interface

You can use the WPS function without accessing the web-based interface of the router. To do this,
you need to configure the following router's settings:
1. Specify relevant security settings for the wireless network of the router.
2. Make sure that the Enable WPS function with hardware button switch is moved to
the right on the tabs of both bands.
3. Click the ENABLE WPS button.
4. Close the web-based interface (click the Logout line of the menu).
Later you will be able to add wireless devices to the WLAN by pressing the WPS/RESET button
of the router.
1. Select the PBC method in the software of the wireless device that you want to connect to the
router's WLAN.
2. Click the relevant button in the software or press the WPS button on the cover of the
wireless device that you want to connect to the WLAN.
3. Press the WPS/RESET button of the router and release. The WPS LED should start
blinking.
Page 114 of 197
Configuring via Web-based Interface