D-Link DIR-806A User Manual page 154

DIR-806A AC750 Wi-Fi Router
User Manual
To create a new tunnel, click the ADD button (
!
Setting for both devices which establish the tunnel should be the same.
Figure 122. The page for adding an IPsec tunnel. The General Settings section.
You can specify the following parameters:
Parameter
Dynamic IPsec
Remote host
General Settings
Move the switch to the right to allow a remote host with any public IP
address to connect to the router via IPsec protocol. Such a setting can
be specified for one tunnel only. Connection requests via this tunnel
can be sent by a remote host only.
A remote subnet VPN gateway IP address. The field is available if the
Dynamic IPsec switch is moved to the left.
Page 154 of 197
Configuring via Web-based Interface
) in the Tunnels section.
Description