Creating Pppoe Wan Connection - D-Link DIR-806A User Manual

DIR-806A AC750 Wi-Fi Router
User Manual

Creating PPPoE WAN Connection

On the connection creation page, in the General Settings section, select the relevant value from
the Connection type drop-down list and specify the needed values.
Figure 69. The page for creating a new PPPoE connection. The General Settings section.
Parameter
Interface
Connection name
Enable connection
NAT
General Settings
A physical or virtual WAN interface to which the new connection
will be assigned.
A name for the connection for easier identification.
Move the switch to the right to enable the connection.
Move the switch to the left to disable the connection.
If the switch is moved to the right, the network address translation
function is enabled. Do not disable the function unless your ISP
requires this.
Page 79 of 197
Configuring via Web-based Interface
Description