Telnet - D-Link DIR-806A User Manual
Ac750 wi-fi router
Hide thumbs
Also See for DIR-806A:
- User manual (233 pages) ,
- Quick installation manual (49 pages) ,
- Quick installation manual (41 pages)
Table of Contents
Advertisement
DIR-806A AC750 Wi-Fi Router
User Manual
Telnet
On the System / Telnet page, you can enable or disable access to the device settings via TELNET
from your LAN. By default, access is disabled.
To enable access via TELNET, move the Enable Telnet switch to the right. In the Port field, enter
the number of the router's port through which access will be allowed (by default, the port 23 is
specified). Then click the APPLY button.
To disable access via TELNET again, move the Enable Telnet switch to the left and click the
APPLY button.
Figure 143. The System / Telnet page.
Page 185 of 197
Configuring via Web-based Interface
Advertisement
Table of Contents
