D-Link DIR-806A User Manual page 86

DIR-806A AC750 Wi-Fi Router
User Manual
Parameter
Encryption protocol
Authentication protocol
Keep Alive
Dial on demand
Extra options
PPP debug
Enable MPPC
When all needed settings are configured, click the APPLY button.
Select a method of MPPE encryption.
No encryption: MPPE encryption is not applied.
•
MPPE 40 128 bit: MPPE encryption with a 40-bit or 128-
•
bit key is applied.
MPPE 40 bit: MPPE encryption with a 40-bit key is applied.
•
MPPE 128 bit: MPPE encryption with a 128-bit key is
•
applied.
MPPE encryption can be applied only if the MS-CHAP, MS-
CHAPV2, or AUTO value is selected from the Authentication
protocol drop-down list.
Select a required authentication method from the drop-down list or
leave the AUTO value.
Move the switch to the right if you want the router to
connected to your ISP even when the connection has been inactive
for a specified period of time. If the switch is moved to the right, the
LCP interval and LCP fails fields are available. Specify the
required values.
Move the switch to the right if you want the router to establish
connection to the Internet on demand. In the Maximum idle time
field, specify a period of inactivity (in seconds) after which the
connection should be terminated.
Advanced options of the pppd daemon which need to be specified
for this connection. Optional.
Move the switch to the right if you want to log
connection debugging.
(Microsoft Point-to-Point Compression)
For the PPTP type only.
Move the switch to the right if it is necessary to use the data
compression function in order to configure the connection.
Move the switch to the left to disable the function.
Page 86 of 197
Configuring via Web-based Interface
Description
keep you
all data on PPP