Table of Contents
Advertisement
Appendix Two
Wired Remote Control (443283)
1. The Wired Remote Control uses 15 metre long cable and has the same functionality as the control mounted
on the unit, it can be permanently mounted in a living space for the end user or used for commissioning the
unit.
2. To fit the Wired Remote Control remove the Front, Rear and Electrical covers, using the cable assembly
supplied insert the RJ11 plug into the socket marked BMS and feed the remaining cable through cable inlet
plate, refit all covers.
3. Connect the cable assembly (4 wires numbered 1 to 4) to the Remote Control terminal block and mount onto
a single gang recessed wall box with the 2 screws provided. The Wired Remote Control will automatically be
detected.
Isolator Relay Controller (442030)
The isolating relay controller allows several LS signals to be combined from independent circuits. For instance,
from lighting circuits on different floor levels.
Sentinel Kinetic MVHR Installation & Commissioning
50
Advertisement
Table of Contents
