Product Description; Sentinel Kinetic & Sentinel Kinetic Plus - Vent-Axia Sentinel Kinetic B Installation & Commissioning

Product Description

Product Description
Sentinel Kinetic & Sentinel Kinetic Plus
The Vent-Axia Sentinel Kinetic & Sentinel Kinetic Plus Mechanical Ventilation/Heat Recovery (MVHR) is a
heat recovery unit designed for the energy efficient ventilation of houses and similar dwellings, conforming to
the latest requirements of the Building Regulations document F 2010.
The unit is designed for continuous 24 hour exhaust ventilation of stale moist air from bathrooms, toilets and
kitchens. As the stale air is extracted, a heat exchanger within the unit transfers up to 90% of the heat into the
supply air entering the bedrooms and lounge.
In addition a Kinetic Plus unit is available that maintains a constant air flow independent of change in the system
pressure.
Fig 1: Sentinel Kinetic (Front of Unit as supplied)
Models
438222 - Sentinel Kinetic B with summer bypass.

438222A - Sentinel Kinetic BS with summer bypass.

443319 - Sentinel Kinetic BH with summer bypass and integral humidity sensor.

443319A - Sentinel Kinetic S BH with summer bypass and integral humidity sensor.

438342 - Sentinel Kinetic V without summer bypass.

438342A - Sentinel Kinetic VS without summer bypass.

443028 - Sentinel Kinetic Plus B with Summer Bypass and integral humidity sensor.

447938 - Sentinel Kinetic Plus BS with Summer Bypass and integral humidity sensor.

443029 - Sentinel Kinetic Plus CVP

Accessories
441838 - Sentinel Kinetic Plug-in integral humidity sensor

441865 - Wireless enable kit (consists of wireless receiver and one wireless switch).

437827 - Additional wireless switch (up to four may be connected).

441780 - Vent-Wise accessory pack – requires sensors.

442367 - Monza System Cooker Hood 600mm wide

442368 - Latina System Cooker Hood 900mm wide

443283 - Wired Remote Control.

447340 - Opto-Coupler

A range of sensors can be used to manage system demand and control the ventilation rate. These include an
internal humidity sensor, humidity sensors for independent mounting in rooms, wireless receiver and wireless
boost switches, CO
options, see www.vent-axia.com
Sentinel Kinetic MVHR Installation & Commissioning
sensor, Vent-Wise sensors, manual switches and pull cords. For these alternative control
2
Fig 2: Sentinel Kinetic Plus (Front of Unit as supplied)
4