Table of Contents
Advertisement
Maintenance
Heat Exchanger Removal Instruction for CVP Unit
1. Remove the 8 screws and detach the front cover
and then pull out both filters.
2. Remove both pressure tubes from their channels
and let them remain suspended in the air as shown
opposite.
3. Pull out the Heat Exchanger Cell to gain access to
the 2 screws on the cell as shown opposite.
Loosen up the both screws (no need to remove
them completely) to be able to remove the pressure
tube and its rubber grommet strip.
Sentinel Kinetic MVHR Installation & Commissioning
41
Advertisement
Table of Contents
