Remote Wired Control - Vent-Axia Sentinel Kinetic MVHR Series Installation & Commissioning Manual

Appendix

Remote Wired Control

1. The Wired Remote Control has the same functionality as the control mounted on the unit, it can be
permanently mounted in a living space for the end user or used for commissioning the unit.
2. To fit the Wired Remote Control remove the Front, Rear and Electrical covers, using the cable assembly
supplied insert the RJ11 plug into the socket marked BMS and feed the remaining cable through cable inlet
plate, refit all covers.
3. Connect the cable assembly (4 wires numbered 1 to 4) to the Remote Control terminal block and mount onto
a single gang recessed wall box with the 2 screws provided. The Wired Remote Control will automatically be
detected.
Sentinel Kinetic MVHR Installation & Commissioning
46