Table of Contents
Advertisement
6 Operation
6.1
Safety
Personnel:
n
User
n
Specialised personnel
Protective equipment:
The selection of the personal protective equipment depends on the utilised medium of the system
owner. The information provided by the medium manufacturer indicated on the safety data sheet
must be adhered to in order to ensure the proper selection of personal protective equipment.
DANGER!
Risk of death due to high pressure!
The material jet exits the front opening of the fluid nozzle with high speed. The material jet
may penetrate skin, enter the body and forcefully inject air.
This presents the risk of causing a fatal embolism.
In addition, there is a risk of poisoning in case of toxic coating or cleaning material.
–
Avoid unintended triggering of the pull lever.
–
Before starting any cleaning or maintenance work, it is imperative to close the material
supply and to discharge the stored residual energy by operating the pull lever. Always
wait until the pressure is released.
–
Never point the hand-held spray gun at living beings.
–
Only trained personnel is permitted to perform cleaning and maintenance work.
WARNING!
Risk of death, risk of injury or property damage due to hazardous media!
Potential consequences: The application of hazardous media can lead to death, severe inju-
ries or property damage.
When handling hazardous substances, ensure that the current safety data sheets of the haz-
ardous substance manufacturer are available. The necessary measures can be derived from
the content of the safety data sheet. Since the hazardous potential of a material can be reas-
sessed at any time due to lessons learned, the safety data sheet must be checked regularly
and replaced if necessary.
The system owner is responsible for the presence and the up-to-date status of the safety data
sheet and the associated generation of the risk assessment of the effected workstations.
GB–18
Operating instructions
T-Dok-666-GB-Rev.1
mail@krautzberger.com, www.krautzberger.com
Advertisement
Table of Contents
