Operation; Safety - Krautzberger KS 5 Operating Instructions Manual

Hand-held Spray Gun KS 5

5 Operation

5.1

Safety

Personnel:
n User
Protective equipment:
n Light respiratory protection
n Safety goggles
DANGER!
Risk of death due to high pressure!
The material jet exits the front opening of the fluid nozzle with high speed. The material jet
may penetrate skin, enter the body and forcefully inject air.
This presents the risk of causing a fatal embolism.
In addition, there is a risk of poisoning in case of toxic coating or cleaning material.
– Avoid unintended triggering of the pull lever.
– Concentration at the work station is imperative.
– When unauthorized persons are present, alert them to keep at a distance from the oper-
ator while he is performing his work.
– Before starting any cleaning or maintenance work, it is imperative to close the material
supply and to discharge the stored residual energy by operating the pull lever. Always
wait until the pressure is released.
– Never point the hand-held spray gun at living beings.
– Only trained personnel is permitted to perform cleaning and maintenance work.
WARNING!
Risk of injury due to improper installation!
Improper installation may cause serious personal injury or material damage.
Note:
– Ensure ample of space for the installation prior to starting any work.
– Handle open, sharp-edged components with care.
– Maintain order and cleanliness at the installation site. Components that are loosely
stacked or lying around can cause accidents.
– Assemble components properly. Adhere to specified screw tightening torque.
– Secure components against tipping or falling.
– Ensure that the utilised hose lines meet the requirements for pressure, chemical and
mechanical loads. At the same time, adhere to the spray media manufacturer's specifica-
tions in the safety data sheet.
■ 200-0368
ENGLISH
GB–19