Downrod-Style Fan Mounting - Harbor Breeze COGDELL COG60BNK7LR Instructions Manual

DOWNROD-STYLE FAN MOUNTING

1a.
Remove pin (D) and clip (E) from downrod (C).
1b. Partially loosen preassembled set screws and nut
in yoke at top of motor housing (I).
2. Insert downrod (C) through canopy (F) and yoke
cover (H).
Then, thread wiring from motor housing (I)
through downrod (C).
3. Slip downrod (C) into motor housing yoke, align
holes and re-install pin (D) and clip (E). Tighten
set screws in motor housing yoke and then tighten
preassembled nut on one of the set screws. Then,
slide yoke cover (H) down until it rests on top of
motor housing (I).
1a
E
Yoke
I
2
F
3
E
E
I
8
1b
C
D
Set Screw
C
H
C
D
Set Screw
H
and Nut
D
Yoke