Vdf Compressor Controller - Daikin Clima-Flex CLIC STAND ALONE Series Installation, Operation And Maintenance Manual

CONTROL PANEL
The following instructions apply to the graphical LCP (LCP 102):
The control panel is divided into four functional groups:
1. Graphical display with status lines. All data is displayed on
a graphical LCP display, which can show up to five items of
operating data while displaying the [Status].
2. Menu keys and indicator lights - change parameters and
switch between display functions.
3. Navigation keys and indicator lights (LEDs).
4. Operation keys and indicator lights (LEDs).
DISPLAY LINES
A. Status line: Status messages showing icons and graphic.
B. Line 1-2: Operator data lines showing user-defined or
user-selected data. By pressing the [Status] key, up to one
additional line can be added.
C. Status line: Status messages displaying text.
ADJUSTING THE DISPLAY CONTRAST
Press [Status] and [ ▼ ] to make the display darker.
Press [Status] and [ ▲ ] to make the display brighter.
Figure 12. LCP Overview
Status
10,4A
1234rpm
43,5Hz
Run OK
Quick
Status
Menu
Menu
OK
On
Warn.
Alarm
Hand
Alarm
Off
on
iom-clicsa-cf-eng
a
1(0)
43,5Hz
b
c
Main Alarm
Menu Log
Menu
Log
Auto
Reset
on

Vdf Compressor Controller

INDICATOR LIGHTS
If certain threshold values are exceeded, the alarm LED lights up
and/or the alarm LED lights up. An alarm status and alarm text are
displayed on the control panel.
The control panel. The power LED is activated when the frequency
inverter is supplied with mains voltage.
• Green LED/on: The control section is running.
• Yellow LED/Warning: Indicates a warning.
• Red LED flashing/Alarm: Indicates an alarm.
Figure 13. Indicator lights
On
Warn
Alarm
LCP KEYS
The control keys are divided into functions. The keys below the
display and the indicator lights are used for parameter settings,
including the choice of display indication during normal operation.
Figure 14. Function keys
The [Status] indicates the status of the frequency converter and/
or compressor motor.
Choose between 3 different readouts by pressing the [Status] key:
5-line readout, 4-line readout or Smart Logic Control by pressing
[Status] twice.
Press [Status] to select the display mode or to return to the display
mode from the quick menu mode, main menu mode or alarm
mode. Also press [Status] to toggle single or dual readout mode.
The [Quick Menu] allows quick access to different quick menus
such as:
• Q1 - My personal menu
• Q2 - Quick Setup
• Q3 - PID Process Loop
• Q4 - Compressor functions
• Q5 - Changes made
• Q6 - Records
• Q7 - Load profile
44
www.clima-flex.com