Vdf Compressor Controller - Daikin Clima-Flex IOM CLIM Series Installation, Operation And Maintenance Manual

Vdf Compressor Controller

Figure 37. LCP Overview
Status
10,4A
1234rpm
43,5Hz
Run OK
Quick
Status
Menu
Menu
OK
On
Warn.
Alarm
Alarm
Hand
Off
on
INDICATOR LIGHTS
If certain threshold values are exceeded, the alarm LED lights up
and/or the alarm LED lights up. An alarm status and alarm text are
displayed on the control panel.
The control panel. The power LED is activated when the frequency
inverter is supplied with mains voltage.
• Green LED/on: The control section is running.
• Yellow LED/Warning: Indicates a warning.
• Red LED flashing/Alarm: Indicates an alarm.
Figure 38. Indicator lights
On
Warn
Alarm
www.clima-flex.com
a
1(0)
43,5Hz
b
c
Main Alarm
Menu
Log
Menu Log
Auto
Reset
on
LCP KEYS
The control keys are divided into functions. The keys below the
display and the indicator lights are used for parameter settings,
including the choice of display indication during normal operation.
Figure 39. Function keys
The [Status] indicates the status of the frequency converter and/
or compressor motor.
Choose between 3 different readouts by pressing the [Status] key:
5-line readout, 4-line readout or Smart Logic Control by pressing
[Status] twice.
Press [Status] to select the display mode or to return to the display
mode from the quick menu mode, main menu mode or alarm
mode. Also press [Status] to toggle single or dual readout mode.
The [Quick Menu] allows quick access to different quick menus
such as:
• Q1 - My personal menu
• Q2 - Quick Setup
• Q3 - PID Process Loop
• Q4 - Compressor functions
• Q5 - Changes made
• Q6 - Logs
• Q7 - Load profile
Use [Quick Menu] to program the parameters belonging to the
Quick Menu. It is possible to switch directly between the Quick
Menu mode and the Main Menu mode.
NAVIGATION KEYS
The 4 navigation keys are used to navigate between the different
options available in [Quick Menu], [Main Menu] and [Alarm Log].
Press the keys to move the cursor.
The [OK] key is used to select a parameter marked by the cursor
and to enable changing a parameter and logs from the Quick
Menu.
Local control keys
The keys for local control are located at the bottom of the control
panel.
Figure 40. Local control keys
51
iom-clim-cf-eng