Table of Contents
Advertisement
does not slide out of the system. If the drive does not match the serial number you wrote down in the
previous step, reinstall the drive in the bay you removed it from, and check the other drive bays.
Figure 66. Removing a drive
3. Label and remove all cables from the rear of the system.
4. Remove the front screws (A) that secure the system to the rack from both sides of the system as
shown in Figure 67 on page 106.
Installing and configuring the system
105
Advertisement
Table of Contents
Need help?
Do you have a question about the 8001-22C and is the answer not in the manual?