IBM 8335-GTA Manual

Hide thumbs Also See for 8335-GTA:

Manual (174 pages)

Installing the system and ordered parts (140 pages)

Servicing (146 pages)

page of 44

/ 44
Bookmarks

Quick Links

Download this manual

Power Systems

IBM Power System S822LC (8335-GTA

and 8335-GCA)

IBM

Need help?

Do you have a question about the 8335-GTA and is the answer not in the manual?

Questions and answers

Summary of Contents for IBM 8335-GTA

Page 1 Power Systems IBM Power System S822LC (8335-GTA and 8335-GCA)
Page 3 Power Systems IBM Power System S822LC (8335-GTA and 8335-GCA)
Page 4 Note Before using this information and the product it supports, read the information in “Safety notices” on page v, “Notices” on page 17, the IBM Systems Safety Notices manual, G229-9054, and the IBM Environmental Notices and User Guide, Z125–5823. ™...
Page 5 Installing the system into the rack by using the Installing the IBM Power System S822LC fixed rails and connecting power cables . . 14 (8335-GTA and 8335-GCA) ..1 Completing server setup . . 16 Prerequisite for installing the rack-mounted server.
Page 6 Power Systems: IBM Power System S822LC (8335-GTA and 8335-GCA)
Page 7 Electrical voltage and current from power, telephone, and communication cables are hazardous. To avoid a shock hazard: v If IBM supplied the power cord(s), connect power to this unit only with the IBM provided power cord. Do not use the IBM provided power cord for any other product.
Page 8 Rack-mounted devices are not to be used as shelves or work spaces. Do not place objects on top of rack-mounted devices. In addition, do not lean on rack mounted devices and do not use them to stabilize your body position (for example, when working from a ladder). Power Systems: IBM Power System S822LC (8335-GTA and 8335-GCA)
Page 9 v Each rack cabinet might have more than one power cord. – For AC powered racks, be sure to disconnect all power cords in the rack cabinet when directed to disconnect power during servicing. – For racks with a DC power distribution panel (PDP), turn off the circuit breaker that controls the power to the system unit(s), or disconnect the customer’s DC power source, when directed to disconnect power during servicing.
Page 10 DANGER: Hazardous voltage, current, or energy levels are present inside any component that has this label attached. Do not open any cover or barrier that contains this label. (L001) (L002) viii Power Systems: IBM Power System S822LC (8335-GTA and 8335-GCA)
Page 11 DANGER: Rack-mounted devices are not to be used as shelves or work spaces. (L002) (L003) Safety notices...
Page 12 DANGER: Multiple power cords. The product might be equipped with multiple AC power cords or multiple DC power cables. To remove all hazardous voltages, disconnect all power cords and power cables. (L003) (L007) CAUTION: A hot surface nearby. (L007) (L008) Power Systems: IBM Power System S822LC (8335-GTA and 8335-GCA)
Page 13 Exchange only with the IBM-approved part. Recycle or discard the battery as instructed by local regulations. In the United States, IBM has a process for the collection of this battery. For information, call 1-800-426-4333. Have the IBM part number for the battery unit available when you call. (C003)
Page 14 (C048) Power and cabling information for NEBS (Network Equipment-Building System) GR-1089-CORE The following comments apply to the IBM servers that have been designated as conforming to NEBS (Network Equipment-Building System) GR-1089-CORE: Power Systems: IBM Power System S822LC (8335-GTA and 8335-GCA)
Page 15 The equipment is suitable for installation in the following: v Network telecommunications facilities v Locations where the NEC (National Electrical Code) applies The intrabuilding ports of this equipment are suitable for connection to intrabuilding or unexposed wiring or cabling only. The intrabuilding ports of this equipment must not be metallically connected to the interfaces that connect to the OSP (outside plant) or its wiring.
Page 16 Power Systems: IBM Power System S822LC (8335-GTA and 8335-GCA)
Page 17 Use the information to understand the prerequisites that are required for installing the server. About this task You might need to read the following documents before you install the server: v The latest version of this document is maintained online, see Installing the IBM Power System S822LC (8335-GTA and 8335-GCA) (http://www.ibm.com/support/knowledgecenter/HW4M4/p8ehm/ p8ehm_kickoff.htm).
Page 18 3. If necessary, remove the filler panels to allow access to the inside of the rack enclosure where you plan to place the unit, as shown in Figure 1 on page 3. Power Systems: IBM Power System S822LC (8335-GTA and 8335-GCA)
Page 19 Installing the system using the slide rails If you ordered the system with the slide rail option, read this section to install the system into the rack using the slide rails. Installing the IBM Power System S822LC (8335-GTA and 8335-GCA)
Page 20 Do not install mismatched hardware by using washers or spacers. If you do not have the correct rails and fittings for your rack, contact your IBM reseller. Procedure 1.
Page 21 5. While you pull the slide rail forward, ensure that all three pins protrude through the rack holes, then push the front latch (2) all the way in. For details, see Figure 5 on page 6. Installing the IBM Power System S822LC (8335-GTA and 8335-GCA)
Page 22 3. Lift the blue release latches (1) on the slide rails and push the server (2) all the way into the rack until it clicks into place. For details, see Figure 7 on page 7. Power Systems: IBM Power System S822LC (8335-GTA and 8335-GCA)
Page 23 The cable-management arm is used to efficiently route cables so that you have proper access to the rear of the system. After you have installed the cable-management arm, connect and route power cables. Installing the IBM Power System S822LC (8335-GTA and 8335-GCA)
Page 24 (2). Note: The support arm (A) is labeled UP and DOWN. Ensure that the side labeled UP is facing upward and to the right. Power Systems: IBM Power System S822LC (8335-GTA and 8335-GCA)
Page 25 4. Attach the cable-management stop bracket (B) to the slot on the inside of the left slide by sliding the stop bracket (B) into the slide rail until the spring-loaded pin snaps into place. Installing the IBM Power System S822LC (8335-GTA and 8335-GCA)
Page 26 6. Attach the mounting bracket (C) to the slot on the inside of the right slide by sliding the mounting bracket (C) into the slide rail until the spring-loaded pin snaps into place. For details, see Figure 14 on page 11. Power Systems: IBM Power System S822LC (8335-GTA and 8335-GCA)
Page 27 (2). Push the tab until the spring-loaded latch snaps into place. For details, see Figure 15 and Figure 16 on page 12. Figure 15. Sliding the cable-management arm tab into the mounting bracket slot Installing the IBM Power System S822LC (8335-GTA and 8335-GCA)
Page 28 Plug the system power cords and the power cords for any other attached devices into the alternating current (ac) power source. 9. Continue with “Completing server setup” on page 16. Power Systems: IBM Power System S822LC (8335-GTA and 8335-GCA)
Page 29 3. At the rack front, align the bottom of the right rail with the bottom hole (c) of the EIA unit selected, in both the front of the rack and the rear of the rack. The locator pins (A) fit into holes (b) and (c) of Installing the IBM Power System S822LC (8335-GTA and 8335-GCA)
Page 30 Learn how to install the system into the rack by using the fixed rails and how to connect power cables. About this task Note: This system requires two people to install the system into the rack. Power Systems: IBM Power System S822LC (8335-GTA and 8335-GCA)
Page 31 6. Install the screws on either side of the system to secure the system to the rack. 7. Plug the power cords into the power supplies. 8. Attach all cables to the rear of the server. Figure 22. Rear view of the system with ports displayed Installing the IBM Power System S822LC (8335-GTA and 8335-GCA)
Page 32 3. You can receive important technical information and updates for specific IBM Support tools and resources by subscribing to receive updates. To subscribe to receive updates, complete the following steps: a.
Page 33 Consult your local IBM representative for information on the products and services currently available in your area. Any reference to an IBM product, program, or service is not intended to state or imply that only that IBM product, program, or service may be used. Any functionally equivalent product, program, or service that does not infringe any IBM intellectual property right may be used instead.
Page 34 All IBM prices shown are IBM's suggested retail prices, are current and are subject to change without notice. Dealer prices may vary. This information is for planning purposes only. The information herein is subject to change before the products described become available.
Page 35 IBM, the IBM logo, and ibm.com are trademarks or registered trademarks of International Business Machines Corp., registered in many jurisdictions worldwide. Other product and service names might be trademarks of IBM or other companies. A current list of IBM trademarks is available on the web at Copyright and trademark information at www.ibm.com/legal/copytrade.shtml.
Page 36 This statement explains the Japan Electronics and Information Technology Industries Association (JEITA) statement for products less than or equal to 20 A per phase. This statement explains the JEITA statement for products greater than 20 A, single phase. Power Systems: IBM Power System S822LC (8335-GTA and 8335-GCA)
Page 37 This statement explains the JEITA statement for products greater than 20 A per phase, three-phase. Electromagnetic Interference (EMI) Statement - People's Republic of China Declaration: This is a Class A product. In a domestic environment this product may cause radio interference in which case the user may need to perform practical action.
Page 38 Um dieses sicherzustellen, sind die Geräte wie in den Handbüchern beschrieben zu installieren und zu betreiben. Des Weiteren dürfen auch nur von der IBM empfohlene Kabel angeschlossen werden. IBM übernimmt keine Verantwortung für die Einhaltung der Schutzanforderungen, wenn das Produkt ohne Zustimmung von IBM verändert bzw.
Page 39 Properly shielded and grounded cables and connectors must be used in order to meet FCC emission limits. Proper cables and connectors are available from IBM-authorized dealers. IBM is not responsible for any radio or television interference caused by unauthorized changes or modifications to this equipment.
Page 40 This product is in conformity with the protection requirements of EU Council Directive 2014/30/EU on the approximation of the laws of the Member States relating to electromagnetic compatibility. IBM cannot accept responsibility for any failure to satisfy the protection requirements resulting from a non-recommended modification of the product, including the fitting of non-IBM option cards.
Page 41 Um dieses sicherzustellen, sind die Geräte wie in den Handbüchern beschrieben zu installieren und zu betreiben. Des Weiteren dürfen auch nur von der IBM empfohlene Kabel angeschlossen werden. IBM übernimmt keine Verantwortung für die Einhaltung der Schutzanforderungen, wenn das Produkt ohne Zustimmung von IBM verändert bzw.
Page 42 Permissions for the use of these publications are granted subject to the following terms and conditions. Applicability: These terms and conditions are in addition to any terms of use for the IBM website. Personal Use: You may reproduce these publications for your personal, noncommercial use provided that all proprietary notices are preserved.
Page 43 Notices...
Page 44 IBM® Printed in USA...

This manual is also suitable for:

Power system s822lc 8335-gca