Dos Priming - Miele PG 8593 Operating Instructions Manual

DOS priming

The dispensing system for liquid process chemicals can only
dispense reliably if the system has been purged of air.
The DOS system must be primed only if:
- It is being used for the first time.
- The reservoir was exchanged.
- The dispensing system has been emptied completely.
Before priming, ensure that the liquid process chemical container is
sufficiently full and the siphons are securely screwed to the
containers. Only one DOS system can be primed at a time.
 DOS priming
DOS...
 (name of dispensing system)
DOS priming
DOS
Automatic priming will start when the dispensing system is selected.
Once started, the automatic priming process can no longer be
canceled.
Select a dispensing system using the  and  arrow buttons.

Press OK to start the priming process.

Automatic priming is successfully completed when the following
message appears in the display:
Dispensing system
successfully primed
Settings 
67