Setting The Concentration - Miele PG 8593 Operating Instructions Manual

Program settings
Setting the
concentration
110
Up to two process chemicals can be dispensed in each wash block.
It is also possible to control the same dispensing system twice.
...
Dosage 1 Dosage 2
 or
Dispensing system

DOS 2 Rinse aid
The number of dispensing systems can vary according to model and
the number of connected DOS modules.
Select an option using the  and  arrow buttons and save your

choice with OK.
Then you can set the dispensing concentration in % (percent).
Adjustment is in increments of 0.01%. The possible range is shown in
the bottom line.
Use the arrow buttons  (higher) and  (lower) to set the

dispensing concentration.
Press OK to save the setting.

No
Yes
DOS
0.30 %
(0.05 - 2.00 %)