Miele PG 8593 Operating Instructions Manual page 116

Laboratory glassware washer for laboratory glassware and utensils
Table of Contents

Advertisement

Program settings
Blower cooling
116
After drying, cooling of the wash load can be accelerated by the
drying system. To do so the drying system blower runs with the
heating switched off, cooling the interior of the wash chamber.
   ...
Cooling down with fan
         
Cooling down with fan
No
-
The drying system blower is not switched on.
Set the time
-
The drying system blower will run for a specified duration.
Use the arrow buttons  and  to select an option and press OK to
confirm your selection.
Set the time
When
has been selected, the duration of the cooling
down pause must then be set.
The setting value is entered in increments of 10. The possible range is
shown in the bottom line of the display.
Use the arrow buttons  (higher) and  (lower) to set the cooling
down duration.
Press OK to save the setting.
No
Set the time
Cooling down with fan
120
s
(10 - 200
s )

Advertisement

Table of Contents
loading

Table of Contents