Refill Indicator; Dispensing Liquid Process Chemicals - Miele PG 8593 Operating Instructions Manual

Checking
consumption

Refill indicator

Dispensing liquid
process
chemicals
Adding and dispensing process chemicals
Push the suction wand into the opening of the container and secure

the lid. Observe the color coding.
Feed the suction wand into the container until it reaches the

bottom.
Wipe up any spilled process chemical thoroughly.

Place the container on the floor next to the machine or in an

adjacent cabinet. The container must not be placed on top of or
above the machine. Make sure that the dispensing hose is not
kinked or trapped.
After that, the dispensing system must be primed (see "Settings  /

Priming DOS").
Check consumption regularly by checking the fill levels in the supply
containers and replace containers in time.
When the fill level is low in the
process chemical, you are reminded to replenish it.
Refill DOS
Confirm the message shown with OK and

Refill the liquid process chemicals as described.

If the container is empty, the machine will be locked against further
use.
It will be ready for use again when the supply container has been
replaced.
For adjusting dispensing concentration, see "Additional settings/
Dispensing systems."
DOS 1
supply container for liquid
53