Beijer Electronics BoX2 base v2 Configuration Manual page 33

Compile Offline
NOTE
When a program change has been made to the project, the project must be
compiled.
The offline compile is triggered by using the option Generate code from the Build menu.
The other two options, Clean/Clean all, will remove the generated application binaries and forces
BCS Tools to regenerate the application. After a Clean or Clean all, the controller must be stopped to
be able to update the application.
NOTE
A project can still be changed online if the offline compile is being used, if it is only
program code changes.
Compile Online
NOTE
When a program change has been made to the project, the project must be
compiled.
This compile is triggered when logging into the CPU if there is uncompiled program code. If there are
any compile errors, the login procedure will be interrupted. The compilation must be successful to be
able to login to the CPU.
If the compilation is successful, a question of online change will be shown.
Beijer Electronics, MAEN363
Getting Started and Commonly Used Functions
33 2023-06