Getting Started And Commonly Used Functions; Create And Download Project Using Ix Developer - Beijer Electronics BoX2 base v2 Configuration Manual

Getting Started and Commonly Used Functions

5. Getting Started and Commonly Used Functions

5.1. Create and Download Project Using iX Developer

5.1.1. Create a Project in iX Developer
For information on creating a new project in iX Developer, see the iX Developer Reference Manual.
When creating a new project for BoX2 devices, we recommend setting the target to BoX2 base/pro
(SC)/extreme (SC) with VNC.
Creating a BoX2 target with VNC allows the user to create graphical screens that can be viewed
remotely via VNC. This can is some cases lead to easier configuration and troubleshooting of the
device.
Creating a target without VNC means that the possibility to create screens and to access them
through VNC is disabled, the hardware and image are identical. A project created without VNC can
afterwards be changed to VNC enabled by changing Target Type in "Project - Settings - Display/
Target".
2023-06 22 Beijer Electronics, MAEN363