Driver Installation
This section provides information on how to install the
CyberPro PCI 4S drivers.
Windows 95
1.
At the Update Device Driver Wizard, click Next.
2.
Insert the driver CD, and click Other Locations.
Type in D:\9x, click OK, then Finish. (Change D: to
match your CD-ROM drive letter)
3.
From the Insert Disk window, click OK. When the
Copying Files dialog box appears, type in
D:\9x, then click OK.
4.
Restart Windows to complete the installation.
Windows 98/98SE
1.
At the Add New Hardware Wizard, click Next.
2.
Select Search for the best driver for your device
(Recommend), then click Next.
3.
Select Specify a location, uncheck the other boxes,
insert the driver CD, type in D:\9x, then click Next.
(Change D: to match your CD-ROM drive letter)
4.
Click Next, then Finish.
5.
Repeat steps 1-4.
6.
Restart Windows to complete the installation.
Windows ME
1.
At the Add New Hardware Wizard, select Specify
the location of the driver (Advanced), then click
Next.
5