Table of Contents
Advertisement
2.
Insert the driver CD, check Specify a location,
uncheck the other box, type in D:\Me, then click
Next. (Change D: to match your CD-ROM drive
letter)
3.
Click Next, Next, and Finish.
4.
Repeat steps 1 - 3.
5.
Restart Windows to complete the installation.
To Verify Windows 95/98/98SE/ME Installation
1.
From the main desktop, right click My Computer,
click Properties, then click Device Manager.
2.
Double click Ports (COM & LPT), CyberSerial PCI
16Cxxx... should be displayed four times.
3.
Double click Multi-function adapters, SIIG
CyberPro 4S PCI board and PCI Function should
be displayed.
Windows NT 4.0
1.
From the desktop click Start, then Run.
2.
Insert
D:\NT4\Install_Serial.exe, then click OK. (Change
D: to match your CD-ROM drive letter)
3.
Click Next when the Welcome window appears.
4.
Choose Install, then click Next.
5.
Click Yes, then click Exit.
6.
Restart Windows to complete the installation.
To Verify Windows NT 4.0 Installation
1.
Click Start, Settings, Control Panel. Double click
Ports device icon.
2.
Four new COM ports will be assigned when
successfully installed.
6
the
driver
CD,
type
in
Advertisement
Table of Contents
