Table of Contents
Advertisement
Changing COM Port Address
Some serial devices need a specific COM port in order to
work. If your serial device works properly, do not
change this setting.
Windows 95/98/98SE/ME
1.
From the Device Manager window double click
Ports (COM & LPT), then double click the
CyberSerial PCI serial port you want to change.
2.
Click Settings tab, click the down arrow that is next
to the Port Name box and select a COM address that
is not currently in use.
3.
Click OK, then close Device Manager to save the
changes. Follow steps 1-3 again to change the other serial
port(s) if needed.
Windows 2000/XP/Server 2003/Vista
1.
From the Device Manager window double click
Ports (COM & LPT), then double click the
CyberSerial PCI serial port you want to change.
2.
Click Settings tab and click Advanced.
3.
Click the down arrow that is next to the COM Port
number box and select a COM port that is not in use.
Click OK.
4.
Click OK, then close Device Manager to save the
changes. Follow steps 1-4 again to change the other serial
port(s) if needed.
9
Advertisement
Table of Contents
