Table of Contents
Advertisement
treatment: Turns the relay ON when the valve is on water treatment.
rapid rinse: Turns the relay ON when the valve is on rapid rinse cycle.
backwash: Turns the relay ON when the valve is on backwash cycle.
Press
and
to switch screens.
draw: Turns the relay ON when the valve is on draw cycle.
tank refill: Turns the relay ON when the valve is on tank refill cycle.
pause: Can be set with customs and variable refill/brining regeneration flows. Turns the relay ON
when the valve is on pause.
Press
to save and to pass to the second relay settings screen if present, or press
the master settings screen without saving.
If already in second relay, or if second relay has not been activated, press
the master settings screen or press
Ref. MKT-IM-018 / C - 08.06.2018
Installer Manual Fleck 5810 - XTR - Programming
Aux. #: Cycle Based
draw
tank refill
pause
to return to the master settings screen without saving.
off
off
on
to save and to return to
to return to
83 / 124
Advertisement
Table of Contents
