Pentair FLECK 5810 XTR Installer Manual page 80

Installer Manual Fleck 5810 - XTR - Programming
By pressing new, the controller let define all regeneration steps.
step # n°: Step type (pause, backwash, draw, rapid rinse, tank refill).
Note
If custom filter has been selected, only available steps will be: pause, rapid rinse and
backwash.
time n°: Adjust the step timing.
Press to save and pass to the next step or press
settings screen.
Pressing modify you can change the settings in the steps that are already part of the custom
regeneration cycle (type and timing).
Press to save and pass to the next step or press
saving.
80 / 124
Regeneration
step # n°
time n°
to valid the last step and return to the master
to return to the regeneration screen without
step
name
10 m
Ref. MKT-IM-018 / C - 08.06.2018