Pentair FLECK 5810 XTR Installer Manual page 82

Installer Manual Fleck 5810 - XTR - Programming
6.3.6.1 Alarm Based
salt alarm: Turns the relay ON in case of salt alarm.
Mandatory
On the valves of series 5810 and 5812, salt alarm must be set OFF because the chlorine cell
kit managed by the XTR is not available for those valves.
valve failure: Turns the relay ON if the valve has a failure.
need service/mainten. req'd: Turns the relay ON when the interval between services is reached.
Press to save and to pass to the second relay settings screen if present, or press
the master settings screen without saving.
If already in second relay, or if second relay has not been activated, press
the master settings screen or press
6.3.6.2 Cycle Based
82 / 124
Aux. #: Alarm Based
salt alarm
valve failure
need service/
mainten. req'd
to return to the master settings screen without saving.
Aux. #: Cycle Based
treatment
rapid rinse
backwash
off
on
off
to save and to return to
off
off
on
Ref. MKT-IM-018 / C - 08.06.2018
to return to