SATO M8485Se Programming Reference Manual page 65

SMALL LABEL START
FUNCTION
To show the start of small label print specification. Only applicable to the M10e printer.
FORMAT <ESC>_F
Place after <ESC>H and <ESC>V but before <ESC>Q.
EXAMPLE
<ESC>A
<ESC>A106363060
<ESC>PD,600,1020,0,0
<ESC>_F
<ESC>V100<ESC>H200<ESC>L0101<ESC>XMHEADER LABEL
<ESC>Q1
<ESC>_F
<ESC>V100<ESC>H200<ESC>L0202<ESC>EMABCD
<ESC>V200<ESC>H200<ESC>L0202<ESC>B103200*11111*
<ESC>Q6
<ESC>_F
<ESC>V100<ESC>H200<ESC>L0101<ESC>XMFOOTER LABEL
<ESC>Q1
<ESC>Z
OUTPUT
(4-16)
NOTES
If there is a sequential number specification after <ESC>_F, the sequential numbers will be printed on
every small label.
Small label print quantityis specified under <ESC>_Q.
Do not specify registration specification from <ESC>_F onward. If specified, accurate print motion may
not be conducted.
E/Pro Programming Reference
Unit 4: Standard Command Codes
4-21
PN: 9001096B