SATO M8485Se Programming Reference Manual page 71

TWO-COLOR PRINT RANGE SPECIFICATION
FUNCTION
Specifies a two-color print range. Only applicable to the CT400/410 printers.
FORMAT <ESC>2S
Place before the quantity command.
EXAMPLE
<ESC>A
<ESC>A108000832
<ESC>V100<ESC>H200<ESC>P2<ESC>L0304<ESC>XMABCD
<ESC>2S2V0001Y0600
<ESC>Q2
<ESC>Z
OUTPUT
(4-20)
NOTES
When <ESC>2S is used, also use the <ESC>A1 command.
Two-color print range can register to 10.
Print quantity will be influenced by print speed and print darkness.
Barcodes printed in two-color may not be clearly read by the scanner.
Use parameter "D" for print darkness <ESC>#E during two-color printing.
Black color printing cannot be performed inside of the block specified under <ESC>2S.
Two-color printing may not be clearly seen on the inner side of 2mm.
For CT400, the center position becomes closer to the left side from 4mm (32 dots) to the print head
center.
E/Pro Programming Reference
Unit 4: Standard Command Codes
a = Head lock specification
0: Left side
1: Right side
2: Both sides
b = Start vertical position (specify label vertical size in dots)
c = End vertical position (specify label vertical size in dots)
4-27
PN: 9001096B