SATO M8485Se Programming Reference Manual page 74

OFFSET SPECIFICATION
FUNCTION
Specifies label stop position. Only applicable to the CT400/410 printers.
FORMAT <ESC>PO
Place after <ESC>A but before <ESC>Z.
EXAMPLE
<ESC>A
<ESC>PO3+08
<ESC>Z
OUTPUT
This command does not result in printer output.
NOTES
It's not necessary to specify <ESC>PO for normal label print.
Specify this command when a proper gap is located.
E/Pro Programming Reference
Unit 4: Standard Command Codes
a = Offset specification
0: Cutter motion
1: Dispenser motion
2: Tear-Off motion
3: Continuous motion
b = Offset direction
+: Forward
-: Backward
c = Offset distance (00 to 99 dots)
4-30
PN: 9001096B