SATO M8485Se Programming Reference Manual page 29

COMMAND QUICK REFERENCE
INSTRUCTION
C
CCa
CLa
CSa
Dabbcccn
d/D~n...n
DCxx...x
E/Pro Programming Reference
Unit 3: Code Quick Reference
Repeat Label. Prints a duplicate of the last label printed.
Card, Slot for Use. Selects the memory area for all following expanded memory commands.
a = Memory Area 1
b Memory Area 2
=
CL/LF Deletion. Deletes the occurance of CR/LF characters in the data stream.
a 0: Do not delete CR/LF
=
1: Delete CR/LF
Print Speed Selection. Specifies a unique print speed in in./sec. through software for a
particular label.
a = Speed Range
Barcode, Ratio 1:2. Prints a 1:3 ratio barcode.
a = Barcode Type
0: NW-7
1: CODE39
2: Interleaved 2 of 5
3: JAN/EAN-13 (fixed ratio)
4: JAN/EAN-8 (fixed ratio)
5: Industrial 2 of 5
6: Matrix 2 of 5
H: UPC-A (fixed ratio)
b Narrow bar width (01 to 12 dots)
=
c Barcode height (001 to 999 dots)
=
n Barcode print data
=
Barcode, Human Readable Information (HRI). Specifies the character type of human
readable information of barcode. May be used in conjunction with the preceding <ESC>D.
d = Character type specification
XU
XS
XM
XB
XL
OA
OB
HRI data
n = HRI print data
Data Matrix. Print Data. Prints data using Data Matrix format specified in BX Data Format
command.
xx...x = Data to be printed. Cannot exceed 500 characters.
DESCRIPTION
3-8
PN: 9001096B