SATO M8485Se Programming Reference Manual page 121

CUT, LAST
FUNCTION
Regulates label feed and cutting when using a cutter assembly with the printer. This
command allows the cutting of a printed multi-part tag or label that is left in the printer after a
job is cut.
FORMAT <ESC>~B
Place in a separate data stream sent to the printer.
EXAMPLE
<ESC>A
<ESC>~B
<ESC>Z
OUTPUT This command will feed the last printed label to the cut position, cut the label and then back
feed to the head position in preparation for printing the next job.
(4-58)
NOTES Only valid for cutter specified models.
Divide and use command <ESC>~B separate from commands <ESC>A and <ESC>Z and cannot be
used in conbination with other commands.
Is only valid when at stop status without performing cut motion after print motion has ended.
E/Pro Programming Reference
Unit 4: Standard Command Codes
4-77
PN: 9001096B