Installing the display
Steps
1. Connect the display connector cable to its connector on the display panel.
2. Affix the adhesive tape over the connector.
3. Flip the display around and align it along the edges of the display panel.
4. Install the screws that secure the display to the display panel.
5. Install the:
a.
camera
b.
display bezel
c.
display assembly
d.
system fan
e.
WLAN card
f.
LED board
g.
battery
h.
back cover
6. Follow the procedure in
Keyboard
CAUTION:
Do not try to remove the keyboard because keyboard is not a removable component. To replace the
keyboard, you must replace the palmrest.
42
Disassembly and reassembly
After working inside your computer