Installing the solid state drive - SSD bracket
Steps
1. Insert the SSD bracket into its slot on the computer.
2. Tighten the screws that secure the SSD bracket .
3. Install the:
a. battery.
b.
back
cover.
4. Follow the procedure in
Removing the solid state drive - SSD
Steps
1. Follow the procedure in
2. Remove the:
a.
back
cover.
b. battery.
3. To remove the hard drive:
a. Remove the screws that secure the SSD to the computer [1] .
b. Disconnect the SSD from its connector on the system board [2].
After working inside your computer
Before working inside your
computer.
Disassembly and reassembly
17