Installing the fan
Steps
1. Install the fan into the slot on the system board.
2. Tighten the screws to secure the fan module.
3. Connect the I/O board and system fan cable to the system board connectors.
4. Install the:
a.
WLAN card
b.
battery
c.
back cover
5. Follow the procedure in
Removing the heatsink
Steps
1. Follow the procedure in
2. Remove the:
a.
back cover
b.
battery
c.
system fan
3. To remove the heatsink:
26
Disassembly and reassembly
After working inside your computer
Before working inside your
computer.